S635G Tracked Heavy-Duty High-Speed Edge Bander | PUR + EVA, Six-Channel Magazine

Overview

The S635G is the tracked clamping model of our EDGESHN S-series. A servo feed and steel tracked pressure system hold the panel down along its full length as it passes release agent, pre-milling, flexible band cutting, five-roller pressing, servo horizontal end trimming, rough and finish trimming, the heavy-duty four-motor copying trace, scraping, glue thread removal, flat scraping, cleaning agent and four-motor dual polishing — at 20, 25 or 30 m/min. PUR and EVA adhesive systems are fitted on the same machine, with a laser applicator optional.

How It Differs from the S635J

Both machines carry the same station package; they differ in clamping and in the smallest panel they can take. The S635G uses steel tracked clamping, runs 20/25/30 m/min, bands panels from 60 mm wide and 150 mm long, takes band heights of 11-65 mm and 26 mm of workpiece overhang, and weighs approx. 6000 kg. The S635J uses pressure-roller clamping, bands panels from only 40 mm wide and 100 mm long, runs 18/23/28 m/min and weighs approx. 5000 kg. Choose the J for a high share of narrow parts, the G for pace and through-feed stability.

Line Integration

In a typical custom furniture line this class of bander sits after cutting and drilling. Combined with automatic loading and unloading it runs with minimal attendance and matches the takt of a six-side drill or nesting router. The six-channel magazine means multi-colour orders do not stop the machine for material changes.

Note

Specifications shown are the standard S635G configuration; connected load and electrical details are confirmed in the technical data sheet for your machine. Contact us for the exact data sheet and quotation.