Our Machines

All Machines CNC Machining Centers Panel Dividing & Cutting CNC Drilling Machines Edge Banding Machines Automation Solid Wood Processing Engraving Machines (Plastic / Stone / Metal)

CNC Machining CentersW5-1632

Five-Axis Gantry Machining Center | Slatted Vacuum Table

Tuodiao W5-1632 five-axis gantry machining center with 3200 x 1600 x 240 mm travel, 9 kW air-cooled 24,000 RPM spindle and a slatted vacuum table with 18 adjustable cup feet, for flat profiled parts that need vacuum fixation in joinery workshops.

Five-axis gantry with slat vacuum table — several standard or profiled operations in one setup
Weihong CNC with five-axis interpolation, tilted-plane / 3+2 and RTCP tool-centre-point control
9 kW air-cooled motor spindle, 24,000 RPM, ISO30 taper (optional 12 kW with HSK63)

View Details

CNC Machining CentersK3-49 / K3-79

K3 CNC Machining Center | 9 kW Automatic Tool Changer Nesting Router

The Tuodiao K3-49 nesting router with a 9 kW high-power spindle, a 7.5 kW vacuum pump and a standard 12-position row tool magazine. Panel cutting, drilling, grooving and profiling all finish in a single setup.

9 kW high-power spindle with automatic tool change
Speed and cutting depth adjust with each tool
Standard 12-position row-type tool magazine

View Details

CNC Machining CentersK3-49-SS / K3-79-SS

Tuodiao K3 Series Full-Sheet Nesting | Auto Loading & Unloading Router

The Tuodiao K3-49-SS and K3-79-SS are 9.0 kW CNC nesting routers with automatic loading and unloading. Feeding, nesting, grooving, vertical drilling and discharging run in one flow for mid and large panel furniture factories.

9.0 kW spindle with a 12-position row tool magazine for cutting, grooving, drilling and shaping
7-zone vacuum table firmly holds sheets of different areas
Auto loading, nesting, grooving, vertical drilling and unloading in one uninterrupted flow

View Details

CNC Machining CentersK3-49-TSS / K3-79-TSS

Tuodiao K3 Series Full-Sheet Nesting | Barcode Printing, Labeling & Cutting

The Tuodiao K3-49-TSS and K3-79-TSS full-sheet nesting machines: automatic loading, labeling and sorted unloading done in one machine. 60-sheet magazine, 120+ standard boards per shift, every part barcode-labeled as it comes off the machine and ready to go straight to edge banding.

Auto loader feeds full sheets from a 60-sheet magazine
Optimized big-sheet nesting that keeps panel waste down
Every part labeled automatically with order and machining data

View Details

CNC Machining Centers1V2-K3-49

Tuodiao K3 Cutting Automation Line | Panel Sizing Cutting Station

The Tuodiao 1V2-K3-49 cutting automation line pairs a CNC nesting router with automatic loading and unloading for continuous sheet breakdown, cutting 230 sheets in 10 hours, and can feed straight into labeling. With the downstream edge banding and drilling stations it forms a panel furniture automation line.

Auto loading/unloading replaces manual board handling, cutting fatigue and risk
Optimized nesting raises material yield and output efficiency
Cutting, labeling and sorting seamlessly linked to reduce handling waits

View Details

CNC Machining CentersK320-49

K320 Cutting Station | Auto Labeling & Column Robot Loading

The Tuodiao K320 intelligent cutting station integrates two K3-49 nesting routers, a 4-axis column robot with a suction-cup system, a labeling machine and intelligent central control. Labels are applied while cutting; the whole cell occupies 81 m² and is designed for the cutting stage of whole-home custom furniture production.

4-axis column robot lifts sheets straight from the stack - no pit foundation needed
Holds a 1260 mm stack of up to 70 sheets of 18 mm stock for uninterrupted running
Full-suction gripper handles sheets without marking the face

View Details

CNC Machining Centers1V2-K8-4/9-J

Tuodiao K8 Series Cutting Station | 4-Axis Robot Unloading & Palletizing

The Tuodiao 1V2-K8-4/9-J cutting station integrates a 4-axis articulated robot for automatic loading, panel positioning, cutting, labeling and unloading with palletizing. Standard 9 kW auto tool-change spindle with a 12-tool servo magazine and a 24-hole vacuum table; it can be linked into an automated production line.

Built-in 4-axis articulated robot loads, unloads and palletizes panels automatically
Auto labeling, loading, panel positioning and cutting complete in one step
Multiple operations run continuously for maximum output

View Details

CNC Machining CentersA+系列

A+ Series CNC Nesting Router

A+ series CNC nesting router with 1300 x 2500 mm working area, four 6.0 kW spindles and vacuum table. Cutting, grooving and vertical drilling in one pass, AC servo drives, compatible with nesting software.

Multiple spindles cover cutting, grooving and drilling in a single setup
Vacuum table firmly holds sheets of different areas
Optimized cutting, slotting and vertical drilling done in one uninterrupted pass

View Details

CNC Machining CentersA+系列

A+ Series Door Panel Shaping Machining Center

A+ series door panel shaping machining center with 9.0 kW air-cooled spindle, 0-24,000 rpm and 8-tool ATC magazine. Cuts 18 mm chipboard at 20 m/min - cutting, grooving, doweling and shaping in one machine.

Multi-purpose: cutting, grooving, dowel drilling and sculpted shaping in one machine
Automatic panel positioning saves labor
Drilling and grooving on both faces of the panel

View Details

CNC Machining CentersA2-T2-D

Double-Station CNC Machining Center | Dual Spindle + 9 Drills

A2-T2-D double-station CNC machining center with two 6.0 kW spindles and a 9-bit drill bank, alternating left/right tables, for high-volume hole drilling on cabinet side panels and shelves.

Alternating double stations: one table loads/unloads while the other machines - no idle time
Two spindles plus a 9-bit drill bank multiply boring efficiency
Vacuum/fixture table suits side panels and shelves alike

View Details

CNC Machining CentersAT1325S

AT1325S Ball-Screw CNC Machining Center

AT1325S machining center with fully ball-screw driven axes, 9.0 kW VFD spindle up to 24,000 rpm and AC servo drives for high-precision wood and panel machining.

Ball screws on X, Y and Z axes keep accuracy stable under heavy cutting
9.0 kW high-speed VFD spindle working with diverse CAM software
AC servo drives for precise positioning and fast response

View Details

CNC Machining CentersT-K4

T-K4 Automatic Labeling Nesting Production Line

T-K4 automatic labeling and nesting line linking barcode labelling with CNC cutting. 9.0 kW spindle, 0-24,000 rpm and up to 80 m/min rapid traverse for full large-sheet optimization workflow.

Labeler linked with the CNC router tags every part automatically for easy sorting
Optimized cutting, grooving and drilling in one continuous flow
AC servo drives with up to 80 m/min rapid traverse

View Details

CNC Machining CentersT-K5-Z-AA

T-K5-Z-AA Dual-Magazine Door Shaping Machining Center

T-K5-Z-AA door shaping machining center with 9.0 kW spindle and 16-tool dual rotary magazine, cutting 18 mm chipboard at 25 m/min, Weihong or Syntec control - cutting, grooving, drilling and shaping in one pass.

Multi-purpose cutting, grooving, dowel drilling and sculpted shaping
Automatic panel positioning with two-face drilling and grooving
16-tool dual rotary magazine for fast, ultra-accurate tool changes

View Details

Panel Dividing & CuttingTD-290

TD-290 CNC Panel Saw | 2900 mm Beam Saw

TD-290 CNC beam saw with a 2900 mm working length for precision breakdown of full sheets in panel furniture production. Servo-driven saw carriage and pusher beam, air-cushioned ball table, automatic clamping-beam and main-saw positioning, ±0.1 mm cutting accuracy, and an interface to order-splitting and nesting software.

Servo-driven saw carriage with 0–120 m/min return speed: short non-cutting travel keeps cycle times down on high-mix cutting lists
Clamping beam and main saw raise and lower automatically with the cutting thickness, so switching board stock needs no manual re-setting
Manipulator feeding built on a high-precision reducer with ground rack and pinion, holding panel accuracy at ±0.1 mm

View Details

Panel Dividing & CuttingTD-330

TD-330 CNC Panel Saw | 3200 mm Beam Saw

TD-330 CNC beam saw with a 3200 mm working length and 120 mm cutting thickness for precision breakdown of full sheets. 15 kW main saw with independent 2.2 kW scribing saw, servo-driven carriage and feeding, air-cushioned ball table, ±0.1 mm cutting accuracy, and an interface to order-splitting and nesting software.

3200 mm working length and 120 mm stack height: full-size sheets cut in one pass, and taller stacks raise output per cycle
15 kW main saw with a separately driven 2.2 kW scribing saw scores the underside before the main blade, so double-faced laminated panels stay chip-free
Servo-driven saw carriage with 0–120 m/min return speed keeps non-cutting travel short on high-mix cutting lists

View Details

Panel Dividing & CuttingTD-380

TD-380 CNC Panel Saw | 3800 mm Beam Saw

TD-380 CNC beam saw with a 3800 mm working length and 120 mm cutting thickness for full-size sheet breakdown in panel furniture production. 15 kW main saw with independent 2.2 kW scribing saw, servo-driven carriage and feeding, air-cushioned ball table, ±0.1 mm cutting accuracy, and an interface to order-splitting and nesting software.

3800 mm working length and 120 mm stack height: oversized and jumbo sheets cut in one pass, and taller stacks raise output per cycle
15 kW main saw with a separately driven 2.2 kW scribing saw scores the underside before the main blade, so double-faced laminated panels stay chip-free
Servo-driven saw carriage with 0–120 m/min return speed keeps non-cutting travel short on high-mix cutting lists

View Details

Panel Dividing & CuttingTD-420

TD-420 CNC Panel Saw | 4200 mm Beam Saw

TD-420 CNC beam saw with a 4200 mm working length and 120 mm cutting thickness for jumbo sheet breakdown. 15 kW main saw with independent 2.2 kW scribing saw, servo-driven carriage and feeding, air-cushioned ball table, ±0.1 mm cutting accuracy, and an interface to order-splitting and nesting software.

4200 mm working length and 120 mm stack height: jumbo and oversized sheets cut in one pass, and taller stacks raise output per cycle
15 kW main saw with a separately driven 2.2 kW scribing saw scores the underside before the main blade, so double-faced laminated panels stay chip-free
Servo-driven saw carriage with 0–120 m/min return speed keeps non-cutting travel short on high-mix cutting lists

View Details

CNC Drilling MachinesT-E5

T-E5 Six-Sided Drill | 1 Upper + 1 Lower Drill Packs, Dual Spindles

The Tuodiao T-E5 six-sided drill has one upper drill pack plus one upper spindle and one lower drill pack plus one lower spindle, completing six-face boring and front/back grooving in a single clamping. Output reaches 1.5-2 panels per minute; the smallest part is 35 x 70 mm, so a whole order runs in one sequence — scan the barcode and go.

Completes six-face boring and front/back grooving in one clamping
Multi-shift production with a short learning curve, at 2-2.5 panels per minute
Smallest single-machine part of 35 x 70 mm, so a whole order runs in one batch

View Details

CNC Drilling MachinesT-E12D

T-E12D Six-Sided Drill | 2 Upper + 1 Lower Drill Packs, Dual Spindles

The Tuodiao T-E12D six-sided drill runs two upper drill packs plus one lower drill pack with a 3.5 kW spindle above and below, on a one-piece welded steel frame. Six-face boring and front/back grooving finish in a single clamping at 1.8-2.2 panels per minute; the smallest part is 35 x 70 mm, so a whole order runs in one sequence — scan the barcode and go.

Two upper drill packs and one lower pack - all six faces drilled and both faces grooved in one clamping
One-piece frame-style high-strength steel body, welded then machined on an imported gantry mill and stress relieved
Bespoke integrated drill packs with built-in pressure rollers: 90% drill-pack utilisation, 30-45% more output

View Details

CNC Drilling MachinesT-E12DA, T-E12DA2

T-E12DA Multi-Functional Six-Sided Drill | Drilling and Profiling in One

The T-E12DA multi-functional six-sided drill has a one-piece welded steel frame and completes six-face boring and front/back grooving in a single clamping. Two upper drill packs plus one lower drill pack, and a 6 kW auto tool-change spindle with a six-tool magazine; the smallest part is 35 x 70 mm, so a whole order runs in one sequence, QR code scanning and go.

One-piece frame-style high-strength steel body, welded then machined on an imported gantry mill and stress relieved
Bespoke integrated drill packs with built-in pressure rollers: 90% drill-pack utilisation, 30-45% more output
Three-position intelligent lifting grippers: below the table to load, above it when idle, level with it during cutting

View Details

CNC Drilling MachinesT-E12DAC

T-E12DAC Multi-Functional Six-Sided Drill | Drilling, Profiling and Side Milling

The T-E12DAC multi-functional six-sided drill adds a side milling power head to its 6 kW auto tool-change spindle with six-tool magazine, so side profiling and pocketing join six-face boring and front/back grooving in a single clamping. One-piece welded steel frame, two upper drill packs plus one lower drill pack, 35 x 70 mm smallest part, QR code scanning and go.

One-piece frame-style high-strength steel body, welded then machined on an imported gantry mill and stress relieved
6 kW auto tool change spindle with six-tool magazine plus a side milling head, so side profiling and pocketing join the drilling cycle
Bespoke integrated drill packs with built-in pressure rollers: 90% drill-pack utilisation, 30-45% more output

View Details

CNC Drilling Machines

Six-Side Drill-Mill Center | Three, Four or Five-Machine Lines

The six-side drill-mill automation line centers on a CNC six-side drill with infeed conveying, buffering and flipping/sorting for continuous six-side drilling. Three-machine lines reach about 6-7.5 panels per minute and five-machine lines about 10-12.5; minimum panel 250x50mm. Ideal for batch custom and panel furniture drilling.

Continuous auto infeed, positioning, drilling and outfeed, cutting manual loading
Double-station: while the left station machines, the right station loads
Dual-channel models machine different panels on both channels at once

View Details

CNC Drilling MachinesT-E22L、T-E22AL

T-E22L Six-Pack Dual-Channel Six-Sided Drill

The Tuodiao T-E22L / T-E22AL is a six-pack CNC six-sided drilling line: four upper and two lower drill packs, dual channel and dual station, each channel running any file. 250-2800 mm panel length, 9-50 mm thickness. T-E22L runs 3.5 kW upper spindles; T-E22AL adds a 6 kW automatic tool change spindle and a 5-position servo magazine for handle, light-strip and side-face work.

Four upper and two lower drill packs - six in total - on a dual-channel, dual-station layout, each channel running any file independently
Six faces drilled and both faces grooved and shaped in one clamping; T-E22AL adds light-strip, straightener and handle grooves plus three-side and concealed-hinge shaping
One-piece frame-style high-strength steel body, welded then machined on an imported gantry mill and annealed to relieve stress

View Details

CNC Drilling MachinesT-E22F

T-E22F Four-Pack Dual-Channel Six-Sided Drill

The Tuodiao T-E22F four-pack six-sided drill runs two upper and two lower drill packs on a dual-channel, dual-station layout, drilling all six faces plus front and back grooving in one clamping. 70-2750 mm panel length, 35 x 70 mm minimum part, QR code scanning.

Dual channel, dual station - all six faces drilled and both faces grooved in one clamping, each channel running a different file
One-piece frame-style high-strength steel body, welded then machined on an imported gantry mill and annealed to relieve stress
Bespoke integrated drill packs with built-in pressure rollers: 90% drill-pack utilisation, 30-45% more output

View Details

CNC Drilling MachinesT-E8DL

Tuodiao T-E8DL Pass-Through CNC Six-Sided Drill

T-E8DL pass-through CNC six-sided drilling machine with single channel, single station and two drill packs. One panel pass drills all six faces; max width 1220 mm, length 2800 mm.

One pass machines all six faces - no flipping, no second locating
Two 150 mm pitch drill packs cover the hole set of standard cabinet hardware
X and Y horizontal drills take the side holes while vertical packs handle top and bottom

View Details

CNC Drilling MachinesT-E8D

T-E8D Pass-Through Six-Sided Drill with Three Drill Packs

T-E8D pass-through CNC six-sided drill, single channel and single station with three 150 mm pitch drill packs. One pass machines all six faces for high-volume cabinet production.

Three drill packs cover more hole diameters and patterns per pass with less idle travel
All six faces are machined in one pass - no flipping or second locating
Four X and four Y horizontal drills take the side holes while vertical packs handle top and bottom

View Details

CNC Drilling MachinesT-E5PTP

PTP Five-Sided Drill-Mill Center | CNC Machining

PTP five-sided drill-mill center with 8-tool magazine, 3.3m working length for dual-station long board processing. Five-sided drilling and milling in one setup.

Five-sided processing in a single setup
8-tool automatic tool changer for milling operations
3.3m working length accommodates dual-station long boards

View Details

CNC Drilling MachinesT-E4PTP

T-E4PTP Double Rank Drill Five-Sided Machining Center

T-E4PTP double rank drill five-sided machining center (CNC multi-drilling machine): two imported drill banks of 9 vertical plus 8 horizontal spindles each, symmetric holes drilled in one pass, four-zone dual-station table, 1300 × 3000 × 200 mm working area and ±0.08 mm accuracy.

Two imported rank drill banks - 9 vertical plus 4 front/rear and 4 left/right horizontal spindles each - drill all five faces in one setup
The twin drill packs machine mirrored hole patterns in a single pass, so panels no longer flip and re-locate
6.0 kW air-cooled spindle for grooving, profiling and contour cutting; automatic tool change available as an option

View Details

CNC Drilling MachinesT-E3PTP

T-E3PTP Five-Sided Machining Center

T-E3PTP five-sided machining center (CNC multi-drilling machine): imported 9 vertical plus 8 horizontal rank drills, a 6.0 kW air-cooled spindle, barcode scanning that starts grooving and drilling automatically, 900 × 3000 × 200 mm working area and ±0.08 mm accuracy.

Imported rank drill bank: 9 vertical plus 4 front/rear and 4 left/right horizontal spindles, so all five faces are drilled in one setup
6.0 kW air-cooled spindle for grooving, profiling and contour cutting; automatic tool change available as an option
Scanning the barcode starts grooving, vertical drilling and horizontal drilling automatically - no manual marking

View Details

CNC Drilling MachinesT-E65

T-E65 Pass-Through Five-Sided Drill

T-E65 pass-through five-sided drill machines five faces of a panel in one clamping, with the bottom face done after flipping. Upper unit: 12 vertical drills, X and Y horizontal drills and a 6.0 kW spindle; lower unit: 6 vertical drills with 3.7 kW spindle. Panels 220-2400 mm long, 50-1300 mm wide, 12-100 mm thick, AC servo drive, 20 kW total power.

Five faces of the panel machined from one clamping; the bottom face is done after flipping
Upper unit: X 2*2 and Y 2*2 horizontal drills, 12 vertical drills, 6.0 kW spindle
Lower unit: 6 vertical drills with 3.7 kW spindle

View Details

CNC Drilling MachinesH-D2

H-D2 CNC Horizontal Side Drilling Machine

H-D2 CNC horizontal side hole drilling machine with infrared auto scanning, 2500 mm travel, a 3.7 kW air-cooled inverter spindle and 40 m/min working speed. Adjustable for different panel thicknesses and simple enough for any operator to learn in a day.

Infrared scanning locates the holes - no manual marking or setting out
Detects the vertical holes already in the panel and drills the matching side holes
Adjustable, so panels of different thicknesses run on the same machine

View Details

Edge Banding MachinesS635J

S635J Heavy-Duty Servo Automatic Edge Bander | PUR + EVA, Six-Channel Magazine

The S635J heavy-duty bander runs a servo feed with pressure-roller clamping, PUR and EVA glue systems (laser optional), a six-channel band magazine, servo horizontal end trimming, heavy-duty four-motor copying trace and four-motor dual polishing at 18/23/28 m/min, taking panels from only 40 mm wide.

Servo feed with pressure-roller clamping, running at three selectable paces of 18, 23 or 28 m/min
PUR and EVA glue systems on the same machine, with a laser applicator available as an option
Six-channel band magazine switched by servo band feed — multi-colour orders do not stop the machine

View Details

Edge Banding MachinesS635G

S635G Tracked Heavy-Duty High-Speed Edge Bander | PUR + EVA, Six-Channel Magazine

The S635G pairs a servo feed with steel tracked clamping for 20/25/30 m/min through-feed, with PUR and EVA glue systems (laser optional), a six-channel band magazine, servo horizontal end trimming, heavy-duty four-motor copying trace and four-motor dual polishing.

Servo feed with steel tracked clamping holds the panel down along its full length, so nothing lifts or drifts at 30 m/min
PUR and EVA glue systems on the same machine, with a laser applicator available as an option
Six-channel band magazine switched by servo band feed — multi-colour orders do not stop the machine

View Details

Edge Banding Machines

Edge Banding Automation Line | Straight Edge Banding Line

The edge banding automation line links single/double-end or return-feed edge banders with auto flipping, buffer recycling and conveying to band all four edges continuously. It reduces manual handling and suits batch carcass edge banding for panel and custom furniture.

Auto flipping and return conveying complete four-edge banding in one cycle
Buffer recycling table links upstream/downstream, cutting manual handling and waiting
Works with flush-join, rough/finish trim, scraping and polishing stations

View Details

Edge Banding MachinesTD-365

TD-365 Automatic Straight Line Edge Bander | Compact Panel Edge Banding Machine

The TD-365 compact automatic edge bander completes EVA gluing, pneumatic six-roller pressing, front and rear end trimming, finish trimming, scraping and polishing in a single pass at 15-24 m/min.

Automatic feeding, gluing and pressing in one pass — panels leave as finished edges
Front and rear end trim units cut flush edges with minimal chipping
Finish trimming levels the side glue line for a clean look

View Details

Edge Banding MachinesTD-368

TD-368 Automatic Edge Bander | Compact Model with Rough Trimming

The TD-368 automatic edge bander runs EVA gluing with pneumatic six-roller pressing, then front and rear end trimming, rough trimming, finish trimming, scraping and polishing in a single pass at 15-24 m/min.

One station more than the TD-365: rough trimming squares off a chipped or sawn edge before the finish pass
EVA gluing with pneumatic six-roller pressing holds the band under even pressure along the whole edge
Front and rear end trim units cut flush ends with minimal chipping

View Details

Edge Banding MachinesTD-468

468 8-Function Automatic Edge Bander | Panel Edge Banding Machine

Compact automatic edge bander with eight processing stations: EVA gluing, pneumatic six-roller pressing, front and rear end trimming, rough and finish trimming, copying trace, scraping and polishing. Ideal for furniture panel production.

Pneumatic six-roller pressing holds the band under even pressure along the whole edge
Granule glue pot with even temperature control
Front and rear end trimming units for flush edges

View Details

Edge Banding MachinesTD-468J

468J Pre-milling High-Speed Automatic Edge Bander | 10-Station Machine

The 468J adds a pre-milling station to the proven 468 platform for a finer, far less visible glue line — ideal for veneer and solid wood edging. Ten stations in one pass at 15-24 m/min.

Pre-mill cutters trim the panel edge before gluing, leaving a clean bonding surface
Clearly finer glue line — the difference shows on dark panels and veneer
All ten stations in one pass: pre-milling, gluing, six-roller pressing, end trimming, rough and finish trimming, copying trace, scraping, cleaning agent, polishing

View Details

Edge Banding MachinesTD-668JG

TD-668JG High-Speed Automatic Edge Bander | No-Clean Dual-Colour Glue Spreading

The TD-668JG high-speed bander runs a fast melter plus glue pot, two pneumatic six-roller pressing beams and a no-clean dual-colour glue spreader, taking panels from release agent and pre-milling through double scraping and double polishing on a 15-inch control screen at 15-24 m/min.

No-clean dual-colour glue spreader: switch colour without stopping to clean or reheat the pot
Fast melter with glue pot shortens start-up heating and top-up time
Two pneumatic six-roller pressing beams hold the band under even pressure with no residue on the face

View Details

Edge Banding MachinesTD-493G·40

TD-493G·40 High-Speed Automatic Edge Bander | Bands Ends Down to 40 mm

The TD-493G·40 high-speed bander runs a no-clean dual-colour glue spreader with two pneumatic six-roller pressing beams, a narrow-edge single-rail end trimmer that bands ends from only 40 mm, and four high-speed tracing units for notched and slatted door fronts, on a 21-inch control screen at 15-24 m/min.

Narrow-edge single-rail end trimming bands ends from only 40 mm wide — small parts no longer need hand touch-up
Where a straight-line bander needs panel length to feed, this machine takes the narrow and four-sided work as well
Four high-speed tracing units follow the profile of the band, so notched, cut-out and slatted door fronts trim cleanly

View Details

Edge Banding MachinesTD-496GE

TD-496GE Tracked High-Speed Edge Bander | EVA Plus Dual-Colour PUR

The TD-496GE tracked high-speed edge bander runs 18-26 m/min with twin-motor emery pre-milling, an EVA glue pot with quick melter alongside a no-clean dual-colour PUR applicator, six-roller pressing with glue scraping, dual-rail high-speed end trimming and a four-motor copying trace with corner rounding, all called up on a 21-inch control screen.

Steel tracked feed with a 5.5 kW conveyor motor holds panels firmly at 18-26 m/min
Two adhesive systems on one machine: EVA glue pot with quick melter, plus a no-clean dual-colour PUR applicator
The no-clean unit changes colour without a stopping clean-out; PUR gives a finer, moisture- and heat-resistant glue line

View Details

Automation

Robotic Panel Loading & Unloading | Automated Feeding System

Robotic material handling for custom furniture plants: sheet loading at the beam saw or nesting router, part unloading and stacking after cutting, infeed robots on the edge banding line, and order-based sorting. Interfaces with beam saws, nesting machines, edge banders and six-sided drills to remove manual panel handling, stabilise cycle time and reduce surface damage.

Sheet loading at the cutting station: the robot lifts engineered boards one by one from a magazine or feed table into the beam saw or nesting router, so no operator has to lift or turn them
Part unloading after cutting: cut parts and offcuts are taken off the table in cutting sequence and stacked by order or by cabinet, keeping the saw running at its own pace
Edge bander infeed: parts are separated one at a time and fed to the edge bander at machine speed, with take-off, turning and return pass handled on the outfeed side

View Details

Solid Wood ProcessingHP系列

HP Series Multi-Spindle Relief Carving Machine

HP series multi-spindle relief machine with 6 to 12 spindles and multiple table sizes, hybrid servo drives, built for batch relief carving on doors and panels.

Parallel multi-spindle carving finishes a whole row of doors per pass for multiplied output
Multiple width and length sizes fit different door panels
Rack X/Y drives with ball-screw Z balance speed and deep relief

View Details

Solid Wood ProcessingH系列

H Series Multi-Spindle Relief Carving Machine

H series multi-spindle relief machine with 6-8 spindles, hybrid or AC servo options, up to 8 m/min working speed for batch door and furniture relief carving.

Synchronized multi-spindle carving for efficient batch production
Rack Y drive with ball-screw X/Z for steady engraving feed
Choice of hybrid or AC servo for flexible configuration

View Details

Solid Wood ProcessingS系列

S Series High-Precision Servo Relief Machine

S series high-precision multi-head relief machine with ball-screw drive on all three axes, AC servo drives and six 0.8/1.5/2.2 kW spindles for fine relief and deep carving.

Ball screws on all three axes with AC servo for reliable high-precision relief and deep carving
Six-spindle head with 0.8/1.5/2.2 kW options for different crafts
10 m/min working speed combining efficiency and accuracy

View Details

Solid Wood ProcessingLT30S5-120-8A

5th Generation 4-Axis 3D Carving Machine | Column Carving Machine

5th generation 4-axis 3D router LT30S5-120-8A with four-axis four-linkage, 8-12 x 2.2 kW spindles and AC servo drives, supporting PowerMill and other CAM software for round and 3D carving.

Four-axis four-linkage design carves 3D figures, columns and flat relief on one machine
8-12 spindle multi-head layout for efficient batch 3D production
Ball-screw axes with AC servo and accurate rotary-axis positioning

View Details

Engraving Machines (Plastic / Stone / Metal)TD1325P

TD1325P CNC Engraving Machine

TD1325P general-purpose CNC engraving machine and router with 1300 x 2500 mm table, 6.0 kW air-cooled VFD spindle, rack drive on X and Y, ball screw on Z - engraves wood and cuts acrylic, PVC, bakelite and double-color board.

Classic 1325 size, the workhorse general-purpose CNC engraver
6.0 kW spindle, 9 kW optional, for cutting and engraving
Rack drive on X and Y axes - fast and easy to maintain

View Details

Solid Wood ProcessingKL1318H / KL2513H

KL Series Solid Wood Curve Nesting Router

KL series solid wood curve nesting router (KL1318H / KL2513H) with a 9.0 kW air-cooled spindle, XY AC servo drives and 20-150 mm material thickness, built for curve and irregular profiling in solid wood.

Developed for the solid wood trade: fast, accurate and leaving a smooth surface that cuts finishing time
Handles material 20-150 mm thick, so 150 mm solid stock nests in one pass
High-precision square linear guides with ball screws and high-power motors for stable running

View Details

Solid Wood ProcessingKL1500-4A

KL1500-4A CNC Tenon and Mortise Machine

KL1500-4A CNC tenoning and mortising machine with two work stations, two sets of 4 x 3.7 kW air-cooled spindles with dust hoods and 850 W AC servo drives, built for solid wood table and chair joinery.

Two work stations machine tenons and mortises together in one clamping
Two sets of 4 x 3.7 kW air-cooled spindles with dust hoods extract chips at the cut
Pneumatic work-length adjustment and fixed clamping units for fast changeover

View Details

Solid Wood ProcessingKL1325-T4

KL1325-T4 Multi-Function Solid Wood Router

KL1325-T4 multi-function solid wood router with four spindles and 1300 x 2500 mm table, consolidating cutting, grooving, drilling and shaping for flexible solid furniture production.

Four spindles consolidate cutting, grooving, drilling and shaping with fewer re-clamps
Vacuum table firmly holds solid wood and jointed panels
AC servo drives feed smoothly through solid stock

View Details

Engraving Machines (Plastic / Stone / Metal)TD2030HP-2Z

TD2030HP Stone CNC Engraving Machine

TD2030HP-2Z stone CNC router with 2000 x 3000 mm table, 5.5 kW water-cooled VFD spindle up to 24,000 rpm and AC servo drives for marble and granite engraving.

2000 x 3000 mm table handles full stone slabs, tombstones and screens
5.5 kW water-cooled spindle stays stable under long heavy loads
Rack X/Y with ball-screw Z keeps accuracy in heavy cutting

View Details

Engraving Machines (Plastic / Stone / Metal)TS1530HP

TS1530HP Aluminum & Copper Engraving Machine

TS1530HP aluminum and copper CNC engraving machine and router with 1500 x 3000 mm working area, high-torque water-cooled spindle and AC servo drives for precision engraving and cutting of metal sheets.

Purpose-built for aluminum, copper and aluminum composite panels
Rigid bed with helical rack on X/Y and ball screw on Z for stable metal milling
Water-cooled spindle keeps temperature low in long runs

View Details

Engraving Machines (Plastic / Stone / Metal)TS2030HP

TS2030HP Dual-Spindle Aluminum & Copper Engraving Machine

TS2030HP dual-spindle metal CNC router and engraver with a 2000 x 3000 mm table and twin spindles, AC servo driven, for batch engraving and high-speed cutting of aluminum and copper sheets.

Twin independent spindles machine two zones at once, doubling output
2000 mm wide table accommodates oversized aluminum sheets
Rigid bed with helical rack on X/Y and ball screw on Z for stable metal cutting

View Details